X K 3 1 9 0 - A 9+
19
★
Printing format refers to appendix
★
Filling printing type can use specialized non-carbon copy and printing paper to
fast print in triplicate. Or specialized normal printing paper to fast print in one
copy.
★
Users may need specialized format of filling printing, please contact Dealers.
2.
Indicator’s data storage and printing is simultaneous, use [print] key store a unit
of complete data, meanwhile, it is printed out. (if printing setting is valid.)
3.
if there is any reason like printer false which leads incomplete printing, after false
is gone, press [supply print] to supplement print the current saved data.
4.
after a series of weighing is done, press [accu print] to print the accumulative
weighing result of this group of record.
5.
when twice printing mode is set, use empty to loaded truck or loaded to empty
truck, after first storage, indicator only shows [LoAd ] about 1.5 seconds to hint
the operator without any printing, because this group of data is incomplete.
But, if you print [supply print] can still print out this incomplete data.
Print result will be always: ① serial number is blank.
② G.W and N.W. is 0
③ Tare weight is current displayed weight.
(Twice printing mode’s setting; please refer to Y parameter of printing setting.)
6.
When one time weighing mode is applied, each weighing will be considered as a
complete record to store and print. If the indicator is in the TARE mode, then
current TARE weight will be considered as record TARE weight. If indicator is not
in TARE mode, then it will call the corresponding TARE weight of such truck No. as
recorded TARE weight (if there is not memorized TARE weight, then this record’s
TARE weight will be 0). One time printing mode setting refers to Y parameter of
printing setting.
7.
When built-in printer is applied (printer model=5) and it is in the weighing mode,
[weighing] key will be performs as paper rolling.
