X K 3 1 9 0 - A 9+
21
lost of DATA.
▲
！
After calibration or amend printing parameter, please delete all weighing record.
XI.
How to input memorized TARE weight
Indicator and memorize 1000 TARE weights, input method are as follow:
1.
Input TARE weight with numeric keys.(*:is original setting value)
Step
Operation
Display
Note:
1
Press [truck
NO.]
In weighing mode
2
Input truck
No.
Press [input]
[o *****]
[o 35790]
Input truck No E.g.
：
35790
3
Input Tare
weight
Press [input]
[P *****]
[P 01000]
Input Tare weight E.g: 1000(kg)
4
Back to weighing mode End
2.
weighing mode to store TARE weight
In TARE weight display mode, drive empty truck on platform, when scale is stable,
press [store TARE] key, then input truck No. and press [input].
3.
when each group of weighing record is store, if there is no memorized TARE
weight of this truck No., then TARE weight of this group of weighing record will be
considered as this truck’s memorized TARE weight and store to RAM.
XII.
Power saving
When power saving function is set to valid, indicator will come to power save mode
after the scale is on ZERO point (no TARE has been done) for 30 seconds. (LED display will
be off, and keep status indicating light.) Now, you can press any key can wake indicator
up.
Power saving function’s setting; please refer to Y parameter of printing setting.
XIII.
Check the software version
In weighing mode, press [print set] and input password [30] and then press [input],
indicator will show [Ver *.**]. *.** is the version of this indicator’s software. Press [weigh]
to go back to weighing mode.
