FAN
ON AUTO
SYSTEM
COOL OFF HEAT
Set At
LEAVE
AM
Hold/Run
Time
Program
Thermostat Operation
Thermostat Operation
LCD Display
Fan Switch
System Switch
See page 4 for details about
this display read out.
Select
ON
or
AUTO
.
ON
will
run the fan continuously.
AUTO
will cycle the fan on
only when the heating or
cooling system is on.
Selects the operation mode
on your HVAC system.
Selecting
HEAT
turns on
the heat mode. Selecting
COOL
turns on the air
conditioning mode.
Selecting
OFF
turns both
heating and cooling off.
When the battery icon appears replace your AA
batteries immediately. Failure to do so may result in your
heating & cooling system becoming inoperable. Freezing or
over heating can occur.
Caution:
User Buttons
Use these buttons to set up
your programming options.
Refer to the next page for
detail.
Temperature Setpoint Buttons
Press the + or - buttons to
select the desired room
temperature.
Fan Switch
System Switch
Temperature Setpoint Buttons
LCD Display
User Buttons
Easy Change Battery Door
See page 5 for details.
Easy change battery door
