To customize your 7 day program schedule, follow these steps:
Select
HEAT
or
COOL
using the
SYSTEM
key. You have to program heat and cool each separately.
Press
MENU
Press
SET SCHEDULE
Note:
Monday is displayed and the
WAKE
icon is shown. You are now programming the
WAKE
time period for the Monday setting.
Use the or key below the time setting to make your time selection for the weekday
WAKE
time period. Note: If you want the fan to run continuously during this time period, select
ON
with the
FAN
key.
Use the or temperature setpoint keys on the right side of your screen to make your tem-
perature selection for the weekday
WAKE
period.
Press
NEXT STEP
Repeat steps 4 thru 6 for Monday
LEAVE
time period, for Monday
RETURN
time period, and for
Monday
SLEEP
time period.
Repeat steps 4 thru 7 for each of the remaining days in the week.
PROGRAMMING THE THERMOSTAT
13
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
8.
A Note About Auto Changeover:
Auto changeover will switch between heating
and cooling as needed. It is very important to
make sure the cooling setpoint temperature is at
least 3º above the heating setpoint temperature
and that the heating setpoint temperature is at
least 3º below the cooling setpoint temperature.
A Note About Programmable Fan:
The programmable fan feature will
run the fan continuously during any
time period it is programmed to be
on. This is the best way to keep the
air circulated and to eliminate hot &
cold spots in your building.
