3
Thermostat Operation
Thermostat Operation
LCD Display
Glow in the Dark Light Button
Temperature Setpoint Buttons
2
Fan/ User Button
System/ User Button
LCD Display
Glow in the Dark Light Button
Temperature Setpoint Buttons
Fan Button:
System Button:
See page 2 for details about
display and read out icons.
The glow in the dark light
button will self illuminate
for several hours after
exposure to ambient light.
This button turns on the
display light when pressed.
Press the
+
or
-
buttons to
select the desired room
temperature.
Select
ON
or
AUTO
.
ON
will
run the fan continuously.
AUTO
will run the fan only
when the heating or
cooling system is on.
Note: Some systems may have fan
control disabled.
Selects the operation mode
on your HVAC system.
Selecting
HEAT
turns on
the heat mode. Selecting
COOL
turns on the cool
mode. Selecting
OFF
turns
both heating and cooling
off. Selecting
EmH
(for heat
pumps with auxiliary heat)
will lockout the compressor
and control emergency/
auxiliary heat.
