NJ1 el. & FREAK el. compact bike usage instructions
36
Check the tyre pressure and correct if
needed (the tyre pressure should always
be as printed on the tyre covers).
If you should discover any problems dur-
ing these checks, please immediately contact
your rehabilitation specialist dealer or
PRO ACTIV. Service and repair work on the
product may only be carried out by your reha-
bilitation specialist dealer or PRO ACTIV.
In addition to these maintenance tasks/checks
by the user, PRO ACTIV has prescribed
maintenance tasks to be carried out by the
rehabilitation specialist dealer or
PRO ACTIV
for safe operation of the product
and to minimise the risk to the user or third-
parties.
The initial inspection is performed after running
200 kilometres or 5 months after delivery
(whichever comes first). The maintenance
schedule can be found in the inspection lists in
chapter 36.
Subsequent inspections are then always per-
formed after 1,000 kilometres running or a
period of 1 year after the last inspection
(whichever comes first). The maintenance
schedule can be found in the inspection lists in
chapter 36.
After extreme stresses, such as during holi-
days where the product was exposed to sand,
sea water or snow, an additional deep clean
and inspection by your rehabilitation specialist
dealer is recommended.
To maintain the warranty validity, the perfor-
mance of the maintenance tasks must be doc-
umented. Any faults identified during mainte-
nance work must be rectified and documented
as such before further use of the product.
Even if your product does not show any signs
of wear, damage or malfunctions, the regular
safety-related checks on your product must be
carried out in accordance with the mainte-
nance schedule.
28.3 Proof of maintenance
To provide proof of the maintenance, you can
use the inspection lists in Chapter 36. Always
keep all receipts/service reports as proof, and
have any service work that has not been car-
ried out by the manufacturer documented.
Please bring these usage instructions/this
service booklet along with you each time
maintenance is performed
.
29 Disposal and recycling
At the end of the service life, the product can
be disposed of by PRO ACTIV or your rehabili-
tation specialist dealer in a proper, environ-
mentally-friendly manner.
The disposal or recycling must be carried out
by a waste disposal company or a municipal
waste disposal centre.
Special guidelines may apply on-location with
regard to the disposal or recycling. These must
be clarified and considered when disposing
(this may also include the cleaning or disinfec-
tion of the product before the disposal). In ad-
dition, the special provisions of the local regu-
lations regarding the disposal of the drive sys-
tem and the rechargeable batteries must be
observed.
In the following text, you will find a description
of the materials for the disposal and recycling
of the product and its packaging:
Aluminium:
frame, rims, leg rest
Steel:
fixing points, quick-release / screwed
axle, screws, nuts
Plastic:
handles, clamp lever, tube plugs,
tyres, bags for packing, battery housing
Copper:
Cable and electrical components in
the drive system
Lithium:
Rechargeable battery
Synthetic fibres and foam:
padding, covers
Cardboard/paper:
Packaging
