Operating instructions SPEEDY F1
21
Figure 42: Compressor
Figure 43: Valve adapter and clamp lever of the
compressor
20.5 Other
If tyres, inner tubes or handrims need to be
replaced, please contact your rehabilitation
specialist retailer.
Please note that changing one type of tyres to
another size is not possible as with welded
caster-wheel bearing blocks the frame design
including the alignment of the caster-wheel
bearing blocks is precisely aligned to the tyre
size ordered and the welded caster-wheel
bearing blocks cannot subsequently be
adjusted.
We recommend: The spoke guard
prevents hands and fingers entering and being
trapped in the wheels when riding. The risk of
injury is thus minimised. In addition, the spokes
are protected for use in sports, e.g. in the
event of collisions.
Figure 44: Spoke protection to minimise the risk of
trapping hands and fingers and to protect the
spokes
21 Caster wheels
21.1 Replacing the caster wheels
To
remove a caster wheel
, unscrew the M6
axle fixing screws (AF 4 mm) on one side.
Figure 45: M6 axle fixing screw on caster wheel axle
M6 axle fixing screws
Valve adapter
Clamp lever
