Usage instructions SPEEDY F4 & F2
30
Figure 70: Base plate and pivot point on the product
(viewed from the below on the side and without a
drive wheel)
The procedure for removing/attaching the
"Removable wheelbase extension" and "Re-
movable wheelbase extension with adjustable
angle" is identical. The following section de-
scribes this procedure using images of the
"Removable wheelbase extension",
Figure 71: Overview of terms
Figure 72: Quick Pin of the wheelbase extension
with locking knob
Figure 73: Jaws of the wheelbase extension
To
attach the wheelbase extension
, guide
the jaws under the wheelchair axle and insert
this on both sides to the pivot point. Now lift up
the wheelbase extension until the base plate is
positioned in the appropriate notch in the
wheelbase extension. Hold the wheelbase
extension in this position and insert the Quick
Pins on the right and left. Now the wheelbase
extension is fixed tight.
Figure 74: Wheelbase extension attached (view
from outer side of product without drive wheel)
Figure 75: Wheelbase extension applied, Quick Pins
inserted (view from the rear)
To
remove the wheelbase extension
, hold it
firmly, press on the locking knobs of the Quick
Pins and remove both Quick Pins from the
wheelbase extension. Loosen the jaws of the
wheelbase extension from the pivot point on
Axle of the wheelbase extension
Jaws on the pivot point
Notch
Pivot point
Base plate
Quick Pin with locking knob
Jaws
Base plate in the notch
Quick Pins inserted
Base plates in the notches
Quick Pin
Jaws
