TRAVELER 4all Ergo & 4you Ergo usage instructions
23
Figure 33: Then re-apply the tensioning loops back
on the back system
Figure 34: Tensioning loops applied slightly to the
back system
Then re-mount the back padding using the
fleece hook-and-loop straps.
If the belt should have mistakenly been
threaded out during the adjustment, see the
following figures for
threading the belt in
correctly
:
Figure 35: Step 1: Threading in the belt
Figure 36: Step 2: Threading in the belt
Figure 37: Step 3: Pulling the belt through
Figure 38: Step 4: Simple threading in of the belt
through the tensioning loops
The belts must always be threaded
through the tensioning loops twice as other-
wise the belts will slacken when using the
product and with heavy loads, and the middle
web of the tensioning loops will sag
significantly.
Pull the rear loop
part to the left
