TRAVELER 4all Ergo & 4you Ergo usage instructions
70
38 Appendix: Tightening torques, securing details and tools
The following table shows the torques for shaft screws with a metric standard thread (valid providing
the drawing, assembly, or usage instructions do not state different values!):
Dimension
Tightening torque Ma in Nm depending on the screw strength
Strength 8.8
(e.g., cylinder head screw)
Strength 10.9
(e.g., oval head screw)
M4
2.1
3.1
M5
4.2
6.1
M6
7.3
11
M8
17
26
M10
34
51
M12
59
87
M10 x 1
36
53
Securing details: All screws on PRO ACTIV products must be secured with "medium strength" thread-
locking fluid (e.g. Weicon AN302-43), provided that no securing clamps are present on the screw con-
nections or a lubrication instruction specifies the use of grease or copper paste.
In the following table you will find tools and care products for your PRO ACTIV product:
Tool
Order number
Adjustment bracket for the caster wheel bearing block
8000 901 000
Special tool for setting the wheel position
Open-ended spanner AF 22/24 mm + 41 mm
8000 900 025
Tool set for PRO ACTIV wheelchairs
Mini high-pressure pump, open-ended spanner AF 8/10 + 10/13
30 mm,
Allen key AF 2.5 + 6 mm,
hexagon socket screwdriver with handle AF 3 + 4 + 5 mm
8000 900 030
Care kit for PRO ACTIV wheelchairs and handbikes
Assembly paste (dosing syringe 10 g), Neoval oil (spray 100 ml),
thread-locking fluid, medium strength (pen system 10 ml),
surface cleaner (spray 150 ml), terminal grease (tube 50 ml)
8000 900 026
Assembly stands
8000 902 000
