WHEEL-E usage instructions
15
Figure 8: Valve with cap
3. Place the valve attachment of the com-
pressed air device or the compressor onto
the valve and, if a clamp lever is available,
secure the connection by applying the
clamp lever.
4. Now check the tyre pressure. If the tyre
pressure does not match the specifica-
tions, correct it.
5. Finally release the clamp lever (if present),
pull the valve attachment off the valve and
replace the valve cap.
Figure 9: Compressor
Figure 10: Valve adapter and clamp lever of the
compressor
20 Functional elements
20.1 Parking stand
20.1.1 Active and passive positions
By pressing down and turning the operating
lever outwards or inwards, the parking stand
position can be changed from the passive to
the active position or vice versa. The passive
position can also be called the travel position.
The parking stand is then folded in to save
space.
Figure 11: Press down and turn the operating lever
Valve adapter
Clamp lever
Valve with cap
Operating lever
