WHEEL-E usage instructions
21
Figure 26: Socket bracket on the steering column
with marking “R” for the right rechargeable battery
and “L” for the left rechargeable battery (seen from
above)
The following figure shows the position of the
rechargeable battery's magnetic connector if
the right “R” rechargeable battery is connected.
Figure 27: Right rechargeable battery connected;
magnetic connector in “R” socket
To switch from the right rechargeable battery
to the left rechargeable battery, both recharge-
able batteries must be switched off with the
ON/OFF button (chapter 20.5.1).
Figure 28: On and off button on the rechargeable
battery
Now remove the protective cap on the “L”
socket and insert the magnetic connector
there. The socket protective cap is inserted in
the “R” socket. Then switch the drive system
back on.
To prevent short-circuits due to moisture,
the protective cap must be placed on the sock-
et that does not have a magnetic connector.
When reconnecting the rechargeable
batteries, always switch the drive system off.
20.5 Drive system
The drive manufacturer's usage instructions
are included with the product as a supplement
to the supplied usage instructions. Operation of
the drive system is described there in detail.
Please observe the contents of these instruc-
tions. You can find a brief summary of some
important topics in the following subchapters.
20.5.1 Switching on and off
To
switch on the rechargeable battery
,
press the ON/OFF button on the rechargeable
battery. Now the LEDs on the rechargeable
battery’s charging status indicator light up.
Figure 29: ON/OFF button on the rechargeable
battery
ON/OFF button
ON/OFF button
