PROAIM ELemac-Bowl Assembly Manual Download

Page: 2 / 9

Multi Adapter Kit

Setup

•

Attach the Euro Flange by matching it with the
thread of the Adapter Plate and then insert
the bolt.

•

Secure all the bolts by tightening them using
the Allen Key.

•

Attach the Distance Rods by matching them
with the side thread on the Adapter Plate and
then secure them using the Allen Key.

•

Attach all the Distance Rods on the Adapter
Plate, as shown in the image. Place the
100mm bowl adapter by matching it with the
threads of the Rods.

Hard Case

Bowl

Euro

Summary of Contents for ELemac-Bowl

Page 2: ...the bolts by tightening them using the Allen Key Attach the Distance Rods by matching them with the side thread on the Adapter Plate and then secure them using the Allen Key Attach all the Distance Rods on the Adapter Plate as shown in the image Place the 100mm bowl adapter by matching it with the threads of the Rods Hard Case Bowl Euro ...

Page 5: ... the image Properly tighten the all bolts using the Allen Key then Michell bowl adapter is ready to use Place the bowl adapter 150mm plate on the rods After inserting the bolts tighten them properly using the Allen Key Place the Euro Adapter on the Adapter Plate by matching it with the thread of the Plate and then insert the bolts Mitchell Bowl Adapter ...

Page 6: ...ovided knob Attach the Plate to the bottom part of the Camera Not Included and then mount the Camera Not Included by pulling the knob of the Fluid Head Mount the Bowl Mitchell on the tripod stand Not Included Secure the Bowl Mitchell using the castle nut from the bottom of the Tripod Stand Not Included Mount 150mm fluid head Not Included insert it into the bowl through the screw ...

Page 7: ...re the Euro Mitchell with the help of the provided ratchet knob Mount the Fluid Head Not Included onto the Euro Mitchell Properly secure the Fluid Head Not Included using the castle ring The Camera Not Included has been properly attached to the Fluid head Mount the Euro Mitchell on the Bazooka Not Included Euro Mitchell Setup ...