3
•
After placing the 100mm bowl adapter on the
rods, then match the thread and insert the
bolts.
•
Tighten the bolt using the Allen Key, so that
bowl euro can be attached properly.
Mitchell
-
Euro
•
Attach the distance rods at equal distance
from each other, as shown in the image.
NOTE:
You can attach rods on the multiple
threads of the Adapter Plate according to your
setup requirement.
•
Attach the Distance Rods on the Adapter Plate
at equal distance from each other according
to your requirement and then secure them
with the help of the bolt.
•
Place the Mitchell Plate by matching it with
the thread of the Distance Rods and then
insert the bolt by matching it with the thread
hole.
•
Properly tighten the bolt of the Mitchell Plate
using the Allen Key.
