6
•
Properly secure the Fluid Head (150mm bowl)
(Not Included)
using the Fluid Head knob.
•
After properly mounting the Fluid Head
(150mm bowl)
(Not Included)
,
remove the
Plate by pulling the provided knob.
•
Attach the Plate to the bottom part of the
Camera
(Not Included)
and then mount the
Camera
(Not Included)
by pulling the knob of
the Fluid Head.
•
Mount the Bowl
-
Mitchell on the tripod stand.
(Not Included)
.
•
Secure the Bowl
-
Mitchell using the castle nut
from the bottom of the Tripod Stand
(Not Included)
.
•
Mount 150mm fluid head
(Not Included)
&
insert it into the bowl through the screw.
