8
•
Mount the Camera
(Not Included)
by sliding it
onto the Fluid Head, as shown in the image.
•
Remove the Plate by pushing the knob of the
Fluid Head
(Not Included)
.
•
Attach the plate of the Fluid Head
(Not Included)
to the bottom of the Camera
(Not Included)
and then properly tighten it
using the screw driver.
•
Tighten the knob of the Fluid Head by pulling
it to secure the Camera
(Not Included)
.
NOTE:
It is a full
-
fledged kit that includes all necessary adapters and tools, created with a goal to be
adaptable with every mount and with as few items as possible. Quickly adapt from Bowl to Euro, Bowl to
Mitchell, Euro to Bowl, Euro to Mitchell, Mitchell to Bowl, Mitchell to Euro, truly one solution for every
situation.
