PROAIM KITE-33 STARTER PACKAGE
9
Attach the rod with L-Brackets with the rectangular frame and tighten the top screw. Then screw-in
the knobs at both ends.
Attach the bigger weight rod with L-Brackets, for this insert the rod into one L-Bracket then add the
black tube with white washers at both the sides, insert the rod into the other L-Bracket and then
add the black tube. Tighten the nut and then attach the knob at the end.
INSTALLING THE REAR FRAME
To mount the Rear section, align the Assembly’s ‘L’ brackets to the tail of jib section and insert the
bolt with washers through one end of the section to the other. Slide the bolt through and hand
tighten.
Add weights to the rear weight section at both sides and tighten the weight closer knobs to secure
properly.
