2
Setup
Loosen the knob of Nato handle to attach it
with Gimbal mounting clamp.
Slide the Nato handle onto the Gimbal
mounting clamp (through the Nato Rail sys-
tem) and tighten it with provided knob.
To attach it with any standard Arm & Vest Sta-
bilization system remove the bottom clamp of
Nato handle.
Now insert the bush into the bottom of handle
& fit it properly. (use bush size as per your
requirement)
Note: Nato Handle having 22mm Mounting Pin
diameter. We provided two bushes which
converts it into 16mm & 19mm diameters.
Insert the Accessory Mounting Clamp onto the
stabilization arm
(Not Included)
. Now you can
attach your
Ronin-S gimbal on it.