2
Position single Steering Push/Pull Bar centrally
on the steering rod mount located on rear
axle of dolly. Connect them properly by
locking with provided knob.
Position dual Steering Push/Pull Bar on the
steering rod mount located on rear axle of
dolly. Connect them properly by locking with
provided knob.
Doorway Dolly Setup
NOTE: You can use both the Steering Bars
together for heavier set ups.
Insert both the Side Boards into 2 connection
rods found on each side of Main Dolly
Platform and secure them properly.
NOTE: While controlling lightweight setups,
you can only use single Steering Bar.
Take out the allen bolts from dolly base to
attach Euro Adapter.
Place the Euro Adapter by carefully aligning
the holes on dolly. Then tighten the allen
bolts back to secure it properly on the base.
