2
DSLM Camera Cage
Setup
•
Remove both the Allen bolts of the camera
plate with the help of a 3/16mm Allen key and
attach it to the bottom part of the camera
cage.
Top Handle
•
Then Align the top plate with the camera cage
and secure it properly with the help of a
3/16mm Allen Key by inserting both the Allen
bolts on the top plate.
•
Place the top handle above the top plate.
NOTE:
The provided multiple threads of the top
plate allow you to mount the top handle
anywhere according to your requirement.
•
After placing the top handle on the top plate,
match the bolt with the side threads of the
handle, insert the button head, and tight it
with the help of a 4mm Allen key.
•
Remove both the Allen bolts on the top plate
with a 3/16mm Allen key.
•
Then secure it with the help of a 3/16mm
allen key.
NOTE
:
You can adjust both the top and base
plates to your requirements by loosening the
bolt and sliding it in.
