2
Basic Shoulder Mount
Setup
Now loosen the knob of the grip handle and
insert the left side of the 300mm long rod.
Then properly tighten both the knobs, as
shown in the image.
Now loosen the top knob of the junction
adapter and insert the 300mm long rod (Dia
15mm).
Then insert another 300mm long rod (Dia
15mm) and tighten the knob properly, as
shown in the image.
Loosen both the knobs of the Junction Adapter
and insert 300mm long rod (Dia 15mm).
Then properly tighten the knob. Repeat the
same process for the other grip handle.
NOTE: It minimizes rotation while shooting
video with your camera, making your shoulder
comfortable and shots more stable.
