PROAIM SR-250-00 Assembly Manual Download

Page: 4 / 5



Loosen the dovetail plate knob for quickly
moving the dovetail plate on the threaded
crossbar.



You can now adjust the plate at your desired
position, as shown in the images.



Push the pin in and remove the Base plate
from the Dovetail plate as shown.



Loosen the rod adapter’s bolt using an
3/16mm Allen key. Now, attach the rod
adapter to the Base plate.



Insert the bolt into the Base plate and tighten
it using the 3/16mm Allen key.



Mount your Camera on the Base plate and
secure the bolt using an Allen key.

Summary of Contents for SR-250-00

Page 2: ...aded crossbar Adjust the Dovetail Quick Release plate and secure it correctly with the help of a knob Slide in the shoulder pad to the dovetail quick release plate as shown in the images Shoulder Mount Rig Setup Secure it correctly using the locking lever Loosen the side rotation knobs present on both sides of the Rosette crossbar and you can rotate the handles up to 360 ...

Page 3: ...n adjust the height up to 50mm Tighten the knob to lock the handles at the desired height Loosen the lower side rotation knobs and you can rotate the handgrips up to 180 Narrow down or widen the handles as per your preference Loosen the rotation knobs present on the bottom of the crossbar to narrow down or widen the space between the handles ...

Page 4: ...as shown in the images Push the pin in and remove the Base plate from the Dovetail plate as shown Loosen the rod adapter s bolt using an 3 16mm Allen key Now attach the rod adapter to the Base plate Insert the bolt into the Base plate and tighten it using the 3 16mm Allen key Mount your Camera on the Base plate and secure the bolt using an Allen key ...