15
1. Swing the footrest/leg rest in locked position to the front of the wheelchair.
2. Pivot the footplates upward to vertical position.
3. Grasp the two (2) straps on the seat rails and pull up to begin closing the wheelchair.
4. Continue to close the wheelchair by grasping the armrest furthest from you and
pulling the armrest toward you.
SAFETY INSPECTION
NOTE
: Every six (6) months take your wheelchair to a qualified technician for a thorough
inspection and servicing. Regular cleaning will reveal loose or worn parts and enhance
the smooth operation of your wheelchair. To operate properly and safely, your
wheelchair must be cared for just like any other vehicle. Routine maintenance will
extend the life and efficiency of your wheelchair
.
Safety Inspection Checklists
Initial adjustments should be made to suit your personal body structure and
preference. Thereafter follow these maintenance procedures:
Inspect/Adjust Initially
_ Ensure wheelchair rolls straight (no excessive drag or pull to one side).
_ Inspect seat and back upholstery for rips or sagging.
_ Inspect back cane handgrips for wear, looseness, and/or deterioration.
_ Inspect for any loose or broken hardware on the wheelchair.
_ Inspect the seat-positioning strap for any signs of wear. Ensure the buckle latches.
Verify that the hardware that attaches the strap to the frame is secure and undamaged.
Replace if necessary.
