22
2. Position new back upholstery on back canes.
3. Securely tighten the new back upholstery to the back canes with the screws and
washers.
NOTE
: The Lightweight Transport has ten (10) screws and washers. The Bariatric
Transport has sixteen (16) screws and washers.
Replacing Seat Upholstery
1. Remove the screws that secure the existing seat upholstery to the cross braces.
2. Remove the existing seat upholstery from the cross braces.
3. Install the new seat upholstery by reversing STEPS 1-2.
REAR WHEELS
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all
attaching
hardware is tightened securely. Otherwise, injury or damage could result.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for
cracks
and wear, and should be replaced.
Removing/Installing Rear Wheels
1. Remove the dust cap (if applicable), hex screw and locknut that secure the rear wheel