background image

2

WARNINGS

ACCESSORIES WARNINGS

NEVER USE THIS PRODUCT OR ANY AVAILABLE OPTIONAL 

EQUIPMENT WITHOUT FIRST COMPLETELY READING 

AND UNDERSTANDING THESE INSTRUCTIONS AND ANY 

ADDITIONAL INSTRUCTIONAL MATERIAL SUCH AS OWNER’S 

MANUALS, SERVICE MANUALS OR INSTRUCTION SHEETS 

SUPPLIED WITH THIS PRODUCT OR OPTIONAL EQUIPMENT. 

IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS, 

CAUTIONS OR INSTRUCTIONS, CONTACT A HEALTHCARE 

PROFESSIONAL, DEALER OR TECHNICAL PERSONNEL 

BEFORE ATTEMPTING TO USE THIS EQUIPMENT - OTHERWISE, 

INJURY OR DAMAGE MAY OCCUR.

PROBASICS PRODUCTS ARE SPECIFICALLY DESIGNED 

AND MANUFACTURED FOR USE IN CONJUNCTION WITH 

PROBASICS ACCESSORIES. ACCESSORIES DESIGNED BY 

OTHER MANUFACTURERS HAVE NOT BEEN TESTED BY 

PROBASICS AND ARE NOT RECOMMENDED FOR USE WITH 

PROBASICS PRODUCTS.

WARNINGS

PROBASICS MOBILE RECLINER TIE-DOWN RESTRAINTS

Compass Health Brands recommends that Mobile Recliner users 

NOT

 

be transported in vehicles of any kind while in mobile recliners. Currently, 

the US Department of Transportation (DOT) has not approved any tie-

down systems for transportation of a user while in a ProBasics Mobile 

Recliner, in a moving vehicle of any type.

ProBasics Mobile Recliners have not been designed and/or tested for 

seating surfaces or vehicle chairs for occupant use within any type of 

vehicle.

Compass Health Brands recommends that users of Mobile Recliners 

should always be transferred into appropriate, DOT-approved seating 

in vehicles for transportation and use be made of the restraints made 

available by the auto industry. Presently, Compass Health Brands 

does not have any participation in the manufacture of Mobile Recliner 

transportation systems.

MAINTENANCE

Maintenance 

MUST

 be performed only by qualified personnel.  

ProBasics Mobile Recliners should be regularly inspected for worn/

damaged mechanism guards. Chairs with damaged guards 

MUST

 be 

removed from service and repaired.

Summary of Contents for PB6074




















Reviews: