Operating Instructions
General
6 / 34
V4
GB
•
Generally, the load (stones slab) is only to be sucked in the
middle
, otherwise the load hangs diagonally under the
device which may cause a breaking of the load - especially
when lifting large stone slabs with a small suction plate.
•
Standard suction plates are not suitable for the transport of
glass plates!
Only
suction plates
of the manufacturer
PROBST
shall be used, which shows doubtless a
maximum load
capacity
at a pressure of
- 0.6 bar
at the
carrying capacity sticker
. In unclear circumstances the vacuum device
and the suction plate may not be put into operation. The manufacturer must be contacted!
•
Some suction plates which can be mounted to the device will reduce its carrying capacity.
The maximum load is indicated on each suction plate.
•
Use only suction plates which are
approved
for this device!
•
Do not exceed
the maximum carrying capacity of the suction plates!!!
Danger: Load
(stone slabs)
will fall down!
NOT ALLOWED ACTIVITIES:
Unauthorized alterations
of the device and the use of any self-made additional equipment could cause
danger and are therefore
forbidden
!
Never exceed the
carrying capacity/working load limit (WLL)
and the
nominal width/nominal size
of the
device.
All unauthorized transportations with the device are not allowed:
•
Transportation of people and animals.
•
Transportation of other loads and materials than described in this manual.
•
Never suspend any goods with ropes, chains or similar at the device.
