PROCAM DISTRIBUTION Villa Pergola, User Instructions

18

MOTOR SETUP

CHARACTERISTICS

• Exquisite and unique appearance design;
• 86*86 national installation standards;
• Using impulse current relay;
• Adopting precision SMT process, surface moisture-proof 

treatment;

• 

Parts of electrical apparatus meet the requirements of fire 

safety standards for electrical standards;

• Power supply safety protection, the power output time is 5 

minutes;

• Can be cooperated with all kinds of launchers and  

tubular motors.

ACTIVATING LOUVERS AND LIGHTS

INITIAL PROGRAMMING

Turn on electricity
Press on the

 lamp key

 for 5 seconds to turn on.

Press on the

 lamp key 

for 15 seconds to turn off.

86 OPERATION INSTRUCTIONS FOR DC CONTROLLER WITH LAMP CONTROL

① 

Indicator light

② 

Closing button

③ 

Stop button

④ 

Opening button

Product model

ZC31-03-2AD

Input voltage

AC100V-240V

Load power

Lamp

≤

500W—Motor

≤

48W

Recieving/ transmitting frequency

433.92MHz

working temperature

-30°C~+65°C

Receiving sensitivity

-110dBm

Number of transmitters allowed

≤

8 pcs

Operation mode

Remote / manual control

PARAMETERS

INSTALLATION NOTES

The main power source must be cut off before installation.
Transmission distance

≤

80 meters.

Please use soft wire and soft cable.
Avoid electrostatic interference, otherwise it will damage the  

components.

Ensure that cable carriers are not affected by longitudinal forces 

after installation.

Maintain a distance of:

•  1.5 meters between reciever and ground.

•  0.3 meters between reciever and ceiling.

•  1.5 meters between reciever and motor.

WIRING

lamp controlled DC receiver (ZC31-03-2AD)

1
2
3
4