background image

7

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

 FOR YOUR AND OTHER PEOPLE’S SAFETY, IT IS IMPORTANT TO FOLLOW THE 

INSTRUCTIONS BELLOW AND OBEY WARNINGS.

SYMBOL EXPLANATION

This warning triangle calls attention to hazards that can lead to death or to severe injuries or to the primordial 

elements for the functioning of the Pergola.

This sign identifies important notes.

SAFETY INSTRUCTIONS

TO INSTALL THIS PERGOLA TECHNICAL KNOWLEDGE IS OBLIGATORY. 

Do not mount this pergola  

yourself and contact a professional workman for help if:

•  you are unsure if the pergola can be mounted on the place you chose for installation.
•  you do not understand the instruction manual or parts of it.
•  you do not have necessary tools available.
•  you do not have necessary technical knowledge

A MINIMUM OF THREE HEALTHY ADULTS ARE REQUIRED TO MOVE AND INSTALL THE PERGOLA.  

The

 

product is big and heavy. Do not try to install the pergola alone. The pergola can cause serious injuries 

and damages if it falls. Contact an authorized assembler for help.

DO NOT INSTALL THE PERGOLA WHEN YOU FIND DAMAGED OR MISSING PARTS.  

Contact your dealer.

KEEP CHILDREN AND PETS OUT OF THE WORKING AREA DURING ASSEMBLY AND ADJUSTMENTS.

THIS PRODUCT AND ITS FIXING PARTS ARE ONLY SUITABLE FOR INSTALLATION ON A RAW CEMENT 

WALL OR STABLE BRICKWORK. CONSULT A PROFESSIONAL IF YOUR WALL/BRICKWORK SHOWS 

CRACKS.

NOBODY IS ALLOWED TO CHANGE THE PRODUCTS’ DESIGN AND STRUCTURE

 without the permission  

of the manufacturer or it authorized deputy.

Make sure your hands are clean at the time of the assembly to avoid soiling the frame.

NOBODY IS ALLOWED TO CLIMB ONTO THE PERGOLA. HANGING ANYTHING ON THE PERGOLA IS 

PROHIBITED.

The sheeting is used to protect the paint, it must be removed afterwards.

This structure is non-permanent, the warranty does not cover damage incurred under extreme weather  

conditions including heavy rain, high winds or if exposed to high heat from heaters or BBQs. 

Safety precautions should always be followed when assembling and using this product to reduce the risk of 

personal injury and damage to equipment. Please read all instructions before assembly and use. Never leave 

children unattended around/under this pergola. Do not attempt to assemble or use the pergola in moderate or 

heavy wind conditions. 

ALWAYS KEEP THE PERGOLA LOUVER OPEN

 and secure it during heavy winds or 

extreme weather conditions to avoid damage to the pergola or personal injury.

Summary of Contents for Villa Pergola





















Reviews: