MACHINE OPERATIONS
COMANCHE 86038890 03/20/07
3-4
SHUT DOWN AND STORAGE
1.
Turn Switch OFF. Empty recovery tank
completely and rinse several times to remove
any dirt or debris that may be left behind.
2.
Drain any unused cleaning solution from solution
tank and rinse with clean water to remove any
suds left behind by the cleaning chemicals.
NOTE:
Dispose of waste in a proper manner
which would not violate any Local, State or
Federal law
3.
Run a small amount of clean water through
pump if chemicals were used. This will help
insure the life of your pump.
4.
Check the spray jet on the cleaning tool for full
spray pattern and inspect vac head for any
obstructions.
5.
Remove as much moisture from system before
storing in cold climates. Excess water may
freeze during storage and crack internal
components, causing damage to the unit.
