AC1204 Powermate Manual 10/01/18
Page 9 of 18
GENERAL OPERATING INSTRUCTIONS
UNPACKING YOUR NEW AC1204 POWERMATE:
When your package is delivered, check the carton carefully for signs of rough handling. If your AC1024 is
damaged, notify the carrier immediately and request an inspection. Be sure to keep the carton, packing inserts,
packing lists and carrier’s receipt until the inspector has verified your claim.
PROCHEMS liability ceases when the carrier picks up the shipment. However, our customer service staff will be
happy to furnish any information needed in connection with the claim and will attempt to expedite a resolution.
PLEASE READ BEFORE OPERATING YOUR NEW AC1204 POWERMATE:
Read the manual carefully and completely before attempting to operate the unit. This manual has important
information for the use and safe operation of the machine. Keep this manual handy at all times.
This equipment has been engineered and manufactured to provide excellent performance and service.
To ensure that your equipment will continue to perform as intended:
Maintain equipment regularly- following the suggested maintenance schedule provided.
Use only original PROCHEM parts when servicing.
Operate equipment with care.
If additional information is needed, please contact:
PROCHEM 0208 974 1515
All information and specifications printed in the manual are current at the time of printing; however, because of
PROCHEMS policy of continual product development, we reserve the right to make changes at any time without
notice.
Preparing the AC1024 POWERMATE for Use.
Set up your extraction machine ensuring that the machine has solution in the solution tank and the waste tank is
empty and defoamer has been drawn through the vacuum hose.
1. Attach the solution hose to the Powermate via the female quick connect on the handle.
2. Attach the 11/2 in cuff of the vacuum hose onto the Powermate tube handle.
3. Ensuring that the power switch of the Powermate is in the off position plug the power cord into the 13A
mains supply.
Operating the AC1204 POWERMATE
.
The Powermate is now ready for use
.
1. Switch on the pump and vacuums of the main parent machine
.
2. Switch on the Powermate the green switch should illuminate.
3. You can now squeeze the trigger on the solution valve and use the Powermate to agitate the solution in
the carpet fibre and vacuum up the used waste solution.
Practical use of the AC1204 POWERMATE
Once the above instructions have been carried out the Powermate must be operated in the following manner.
1. Tilt back the AC1204 so that the brush is clear of the carpet and push the unit forward to full extent of
arm movement.
2. Tilt the AC1204 forward until the brush contacts the carpet.
3. Tilting the unit to maintain contact squeeze the solution valve trigger and pull the unit towards you.
4. This is the end of the cleaning stroke you should notice waste solution being drawn through the front
clear suction cover.
5.
Under no circumstances should the AC1204 be pushed forward with the brush in contact with
the surface being cleaned, this action will result in the machine being damaged.
