Version 1.1
◆
Setup Fan ON Time
Press
◁
or the Menu Button to move or go back to
the previous menu options.
Press the ² / ¼ buttons to highlight Fan ON Time. Press
the OK Button.
Press the
▷
buttons to select ON/20 Min/30 Min and
press the OK button to confirm. When ON is selected,
the display’s fan will operate constantly. If 20 Min or 30
Min are selected, the display fan will operate for those
durations when the temperature selected in
Temperature Setting is met.
◆
SETUP Temperature Setting
Press
◁
or the Menu Button to move or go back to
the previous menu options.
Press the ² /¼ buttons to highlight the Temperature
Setting Menu, and press the OK button to adjust the
level.
Press the
▷
buttons to select the temperature setting at
which the fan will operate. Values between 35˚C~80˚C
are possible. Press the OK button to select the level.
◆
Internal PC Setting
Refer to bottom when remove the OPS PC or use external
PC.
Press a remote-control button like a below procedures if you want
to go to internal PC.
(EIXT
¼
¼
¼
¼
EIXT)
After finishing your adjustments, press the [Exit] button to exit the OSD MENU.
19
