11/32
2009/06 - Indice de révision : F - Code : 0026660
Assemble the base by clipping the 2 tabs on the
pump support plate (A) into the notches on the filter
support plate (B).
A
B
Position the pump on its support plate and fix it into
position by driving 2 screws, washers and nuts.
1
2
ASSEMBLING THE GROUP AND LOADING THE FILTER MEDIA
Lower the filter onto its base, taking care to position the
drain plug in the cut-out provided for this purpose.
Drain plug
Cut-out
Unscrew and remove the ring.
Remove the lid/valve assembly (positioned
upside-down during transport).
4
5
5
Screw in the drain plug.
3
