12/32
2009/06 - Indice de révision : F - Code : 0026660
6
Quantity of sand
MGi 400
20 kg
MGi 400 EH
25 kg
MGi 500
50 kg
Grain size
0.6 / 1.25
Check that the collector plate is correctly
positioned at the bottom of the filter tank. Insert the
collector pipe (topped with its plug) into the hole in
the middle of the collector plate.
7
Gluing the unions onto the lid:
The transparent union is joined to the waste
outlet, the black union to the inlet and the 3
piece union to the outlet on the ‘pump’ side.
Caution: avoid using excess glue, this could
damage the ball in the valve.
8
Carefully pour the sand into the filter and, using
your hand, spread it out evenly.
9
10
Orient the pressure gauge and place it in its
housing
.
Mounting the pressure gauge:
Working from the top, put the o-ring into the
groove in the lid.
