P10.
Mainsheet and
traveller rope
1. Thread the traveller rope (G) through the eyes on the
stern of the boat, through the loop in the rope end and
down through the cleat on the aft of the bulkhead. Tie a
stop knot in the end.
2. Shackle the mainsheet block on to the rope traveller,
making sure that the shackle itself - and not the pin -
runs on the rope.
3. Attach the other mainsheet block to the boom end with
the cotter pin and split ring as shown.
4. Lead the free end of the mainsheet forward and tie a
stop knot in the end.
Downhaul and
kicking strap
1. Clip the kicking strap hook onto the webbing strop’s
metal ring on the underside of the boom.
2. Clip the downhaul hook through the webbing eye on the
sail. And attach opposite end with carbine hook to kicking
strop on lower mast as shown.
3. Attach the kicking strap block to the ring on the mast
webbing strop with the split pin. One end of the kicking
strap rope is attached to the block.
Mainsheet and traveller rope
1.
2.
3.
G
D
D
D
4.
Downhaul & kicking strap
1.
2.
2 - 3.
B
C
B
F
Owners manual Topper 8/2/06 12:34 Page 10
