To attach the 6:1
downhaul
This is set up ready, all you need to do is attach the carbine
hook with the single block on it to the webbing loop
towards the front of the sail and the carbine clip with two
pulleys to the kicker fitting on the mast.
Centre-mainsheet
system
The extra length mainsheet (A) features a ratchet block
which fits on the back of the daggerboard and three other
blocks, one on the traveller, one on the outer end of the
boom and the final one on a short length of rope behind the
kicking strap webbing.
1. Attach the becket block onto the boom end fitting with
the short rigging link supplied and the simple loop-top block
onto the traveller rope with the forged shackle.
Lead the mainsheet as follows:
Tie the mainsheet to the becket of the block attached to the
end of the boom.
2. Take the free end of the mainsheet down through the
block attached to the traveller, from front to back, and back
up through the boom end block from the rear.
Owners manual Topper 8/2/06 12:34 Page 14
