background image

International topper

guarantee

3-year hull 

warranty 

conditions

Topper International Ltd warrants to the original retail 

purchaser that each boat will be free from defects in 

material and workmanship under normal use and service 

for a period of three years (36 months) from date of 

delivery to said purchaser.

This warranty does not cover defects or breakages caused

by misuse, owner error or omission.

Within this three year period, warranty repairs will be 

made by Topper International at its premises or at the

option of Topper International by an authorised Topper

International dealer.These repairs will be made at no charge.

The transportation costs are the sole responsibility of the

boat owner.

Notice of each warranty claim must be submitted in writing

to Topper International within a reasonable period of time

after discovery of any claimed defect and must be approved

by an authorised representative of Topper International who 

will determine whether the claim is valid or/ and covered by

this limited warranty and whose decision shall be final.

Any boat which has been subjected to misuse, negligence

or accident, or that has been used for commercial or 

rental use, or that has been operated contrary to accepted

good boating practice is not covered by this warranty. This

warranty does not cover loss of time, inconvenience, loss of

use of boat or any other expenses incurred.

parts warranty 

conditions

All equipment or accessories which are not manufactured

by Topper International whether or not warranteed by such

other manufacturers are guaranteed for a period of twelve

months.

register of guarantee

Please refer to terms and conditions of sale.  

Please complete and return your register of guarantee.

join the club

Topper is one of the world’s largest and fastest growing

dinghy classes!

We are so sure that you will want to keep in touch with the

Topper scene internationally that, for the remainder of the

year in which you bought your new Topper we are offering

you a FREE membership of the International Topper Class

Association.

ITCA will send you regular newsletters and a magazine 

containing information on Topper activities and regattas,

technical advice and sailing and rigging hints.

ITCA will put you in touch with Topper sailors in countries to

which you may be planning a visit.

ITCA will offer you a range of clothing and accessories

designed specially for the Topper sailor.

ITCA will liaise between your own national or regional

Association, other regional Topper Associations and

International Yachting Administrators.

Free membership is available now to first year owners.

Contact the International Topper Class Association at 

ITCA (GBR) 17 Woods Hill Lane, Ashurst Woods, 

West Sussex, RH19 3RW or telephone on01342 311873.

We will then directly process your membership.

Owners manual Topper  8/2/06  12:35  Page 20

Summary of Contents for Topper

























Reviews: