P8.
Preparing the
mast
1. Slot the two mast sections together, making sure that the
slots in the upper section have properly engaged with the
rivets in the lower section.
sleeving the sail
1. Unfold the sail and lay it on the ground with the bottom
edge of the luff sleeve adjacent to the top of the mast.
2. Insert the mast into the luff sleeve and pull the sail down
the mast. If it is windy, keep your back to the wind!
3. Continue until the whole sail is sleeved and the masthead
has appeared through the top of the sail.
4. Use the Halyard Loop to attach the sail to the top of the
mast as shown.
5. Tuck any surplus rope neatly inside the luff sleeve and
insert the burgee into the special socket.
Preparing the mast
1.
Sleeving the sail
2.
2-3.
4.
A
A
Owners manual Topper 8/2/06 12:34 Page 8
