11
Cleaning, Storage and Maintenance
1.
Wash bowl, cover, blade, discs,
removable drive sleeve, food gate,
and food pusher in hot, soapy water.
Rinse and dry thoroughly. See page
5 for information on how to remove
food chute lid for cleaning.
To clean food thoroughly from the
bowl and bowl lid/food chute,
immerse in hot, soapy water.
NOTE:
Do not store unit with cover
in locked position; this may put
strain on interlock tab.
2.
Wipe base, control panel, and cord
with a damp cloth or sponge.
To remove stubborn soil, use a mild
non-abrasive cleanser.
3.
To store, place bowl on base. Then
place Chopping/Mixing Blade on
motor shaft and Slicing/Shredding
Disc on Chopping/Mixing Blade.
The Removable Drive Sleeve may be
stored in the bowl. Place cover on
bowl but do not lock.
4.
Monthly place a drop of vegetable oil
on each screw in the food chute.
The suction cup feet on the bottom of
your Big Mouth
™
Food Processor are
designed to keep the unit stationary
during use. To maximize the life of your
Big Mouth
™
please review the following
directions:
OR
With Big Mouth
™
fully assembled: lift it
from counter by
placing hands
under unit as
shown and lifting
to one side.
With Big Mouth
™
fully assembled: lift it
from counter by
grabbing the han-
dle as shown and
lifting from same
side as handle.
With bowl and lid removed from Big
Mouth
™
: lift it
from counter by
placing hands
under unit as
shown and lifting
to one side
OR
How to Release Suction Cup Feet
After Use
w
WARNING
Electrical Shock Hazard
• Disconnect power before cleaning.
• Do not immerse cord, plug or base
in any liquid.
Failure to follow these instructions
can result in death or electrical shock.
840150200 Ev02.qxd 5/15/06 5:12 PM Page 11