52
Alarm Output
Define alarm output signal “high” or “low ” as the normal alarm output status
according to the current alarm application.
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take when the alarm is
triggered. All options are listed as follows:
•
Enable Alarm Output
Select the item to enable alarm relay output.
•
Send Alarm Message by FTP/E-Mail
The Administrator can select whet her to send an alarm message by FTP
and/or E-Mail when an alarm is triggered.
•
Upload Image by FTP
Select this item, and the Administrator can assign a FTP site and
configure various parameters as s hown in the figure below. When the
alarm is triggered, event images will be uploaded to the appointed FTP
site.
