62
higher threshold. Settable Tampering Du ration time range is from 10 to 3600
seconds.
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take when tampering is
detected. All options are listed as follows:
•
Enable Alarm Output
Check the item and select the predef ined type of alarm output to enable
alarm relay output when tampering is detected.
•
Record stream to SD Card
Select this item, and t he Tampering Alarm record ing will be stored in
Micro SD/ SDHC card when tampering is detected.
NOTE:
Please make sure the local recording (with Micro SD/
SDHC card) is activated so that
this function can be implemp-
nted. See section
5.3.12 Recording
for further details.
•
Send Alarm Message by FTP/E-Mail
The Administrator can select whet her to send an alarm message by
FTP and/or E-Mail when tampering is detected.
•
Upload Image by FTP
Select this item, and the Administ rator can assign a FTP site and
configure various parameters as shown in the figure below. When
tampering is detected, event ima ges will be uploaded to the appointed
FTP site.
