ProCurve 800 Configuration Manual Download | Manualshive

Page: 210 / 406

background image

4-16

Configuring the RADIUS Server—Integrated with ProCurve Identity Driven Manager

Configure the NAC 800 as a RADIUS Server

3.

Add user accounts to the local database through IDM.

You must complete two steps on the IDM server:

a.

Modify the NAC 800’s domain and select

Enable Local Authentica-

tion for ProCurve NAC devices

.

b.

Add users to the realm.

IDM automatically configures on the NAC 800 any user that you add
to the NAC 800’s realm. You must, however, configure passwords for
those users.

See the

ProCurve Identity Driven Management Users’ Guide

for more

detailed instructions in completing these steps.

4.

You are now ready to specify your network’s NASs. (See “Add NASs as
802.1X Devices” on page 4-40.)

Configure Authentication to a Windows Domain

The Windows Domain authentication method allows the NAC 800 to check
end-user credentials against credentials stored in AD.

The NAC 800 joins the domain. Then, when it receives an authentication
request from an end-user, the NAC 800 uses NT LAN Manager (NTLM) to query
a domain controller (a server that runs AD) and check the end-users’ creden-
tials.

To set up the Windows domain authentication method successfully, you must
ensure that:

■

Endpoints and NASs meet requirements for NTLM authentication:

•

End-users are members of the domain.

•

For 802.1X authentication, endpoints support PEAP or TTLS with MS-
CHAPv2 as the inner method.

N o t e

If your NASs or endpoints do not support the correct authentication
methods, the NAC 800 cannot authenticate end-users directly against AD.
You must either proxy authentication requests to another RADIUS server
or select local authentication in IDM to duplicate user accounts on the
NAC 800’s local directory.

«
...
208
209
210
211
212
...
»

Summary of Contents for 800























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800

Brand: IBM Pages: 72

Brand: GE Pages: 146

Brand: Zonet Pages: 8

Brand: Direct IP Pages: 76

Brand: SUNRICH TECHNOLOGY Pages: 5

Brand: Speedtouch Pages: 124

Power Control Processor

Brand: ETC Pages: 64

Core 2 Quad Q9400

Brand: Intel Pages: 2

Brand: ZyXEL Communications Pages: 244

Brand: Advantech Pages: 50

IPLink 2603 Series

Brand: Patton Pages: 120

Brand: XtendLan Pages: 52

Brand: Perle Pages: 491

Power System S914

Brand: IBM Pages: 48

Brand: Tenda Pages: 120

TeleMyo 2400T V2

Brand: Noraxon Pages: 52

Brand: Lanner Pages: 99

Brand: Matrix Switch Corporation Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands