www.prodevice.eu
13
USING ASM 240 DEGAUSSER WITH A PC
11.
Press the START/STOP button and power button after the completion
of the cycle to turn off the device correctly.
The device is adapted for use with a PC with software to enable configuration
and checking degausser operating parameters.
ASM240 has a RJ45 Ethernet port hidden in the right panel of housing.
The RESET button is located next to the port used for changing the settings
of network address to a standard address in case of loss of device’s network
address settings.
To change network address to standard address, press and hold RESET
for approx. 5 s after turning the device on with the main power switch. Change
of the network address to default value is shown with applicable message
on the display.
Communication between computer and the device is possible only directly
after turning on the device with main switch before the first cycle.
