background image

www.prodevice.eu

03

Thank you for purchasing ProDevice ASM240 degausser. This device 
was designed using state of the art technical know-how and manufac-
tured using modern and reliable electrical, electronic and mechanical       
elements. It produces a strong magnetic field to completely delete data 
from magnetic storage media. It was designed and manufactured in our 
modern R&D center, which is fully-equipped and adapted to scientific    
research end experiments.
ASM240 safely and completely removes data from magnetic media 
using a strong electromagnetic field generated by the device. Each 
erase cycle is verified by the built-in microcomputer, which guarantees  
a successful process of data removal.
Please read the manual carefully before using the device.
Observe instructions included in the manual to prevent incorrect use 
and possible damage to the degausser.

Retain the instruction manual and keep it in a secure place.

FEATURES OF ASM240 DEGAUSSER 

• 

100% efficiency – permanently data removal from media with an 
electromagnetic field up to 20,000 Gauss (2T) 

• 

automatic operation - a fully automatic process of data removal from 
the magnetic media

• 

Network mode – the possibility of connecting the device to the Eth-
ernet network

• 

PPMS (Pre-Paid Management System) technology – charging  of de-
vice  remotely  for  a  specified number of data removal cycles

Summary of Contents for ASM240



















Reviews: