Model 2055B
Energy Monitor with Standby Killer Operation Manual
Thank you for purchasing the 2055B Energy Monitor with Standby Killer. This operating manual will provide an overview of the product,
safety instructions, a quick guide to operation, and complete instructions for correct usage. Take the time to completely review these
instructions as well as safety warnings to ensure your best use of the product.
Now you can use this Energy Monitor with Standby Killer unit to check your appliance spend you how munch money, CO
2
emissions, and as
a standby killer to shunt down your appliances when they are not used, they are on standby condition. The unit combines human motion by
PIR (Pyroelectric Passive Infrared) sensor detection, and appliance’s standby power level, to control AC power on or off automatically. AC
power by demand, people come, AC power on; people absent, AC power off, save energy, save CO
2
emissions to protect our only one earth.
Advanced features also included:
Monitoring Voltage, Amperage, Watt, KWH, Elapsed Time, Costs and CO
2
emissions.
Displaying SAVE Amperage, Watt, KWH, Elapsed Time, Costs and CO
2
emissions.
Over current, safe power to your expensive equipments.
Zero power crossing switches provide a spike free ON/OFF relay control to prolong your appliances usage life.
Now you’ll know how much power your entire appliances are using, and saving power by Energy Monitor with Standby Killer. With the
innovative Energy Monitor with Standby Killer you’ll have peace of mind in more ways than one.
Safety Instructions:
The operating voltage is limited to +/- 10% of Line voltage 230Vac. Do not use it in other voltage rating.
The maximum output current is 13A.
To reduce the risk of electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service
personnel.
There shall be a statement in the instructions that, if the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
Measurement category II is for measurements performed on circuits directly connected to the low voltage installation.
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
To reduce the risk of electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service
personnel.
Feature Locations:
