PRODIS SM204 Quick Start Manual Download

Page: 2 / 3

C. LED STRIP

a. Location of LED switch

Open the zipped pocket (7)

Take out the switch housing and remove the
plastic protection.
Note: See the instructions below for the 3
lighting modes.

b. How to turn on the LED strip

Press the button on the switch firmly to turn on the LEDs.

Press firmly again to set the LEDs to fast flashing mode.

Press firmly a third time to set the LEDs to slow flashing mode.

Press firmly a fourth time to turn off the LEDs.

D. HOW TO CHANGE THE LED STRIP BATTERIES.

Batteries required: two CR2025 batteries (included)

Insert a coin into the groove
as shown in the diagram
above. Turn clockwise

towards “OPEN”.

Remove the used batteries
and insert the new batteries
(with the + terminal facing
upwards).

Close the battery
compartment by turning the
cover anti-clockwise towards

“LOCK”.

Summary of Contents for SM204

Page 1: ...0 dB with pull pin integrated into the shoulder strap 4 RFID blocking interior compartments to prevent RFID skimming B DESCRIPTION OF THE SAFETY BAG ALARM 1 Bag handle 2 Slash resistant shoulder strap...

Page 2: ...set the LEDs to fast flashing mode 3 Press firmly a third time to set the LEDs to slow flashing mode 4 Press firmly a fourth time to turn off the LEDs D HOW TO CHANGE THE LED STRIP BATTERIES Batteries...

Page 3: ...nnected to the pull pin on the safety alarm To stop the alarm replace the pull pin back into the hole on the safety alarm WARNING You should not dispose of this device with your household waste A sele...