1150.11E
January 2007
www.produal.fi
Enquiries: T:
05 230 9200
F:
05 230 9210
Copyright
2005 Produal Oy. All rights reserved
Products meet the requirements of directive 89/336/EEC and standards EN50081-1: 1992 (Emission) and EN50082-2: 1995 (Immunity).
Controller
Configuration
The controller is parameterised locally via a configuration mode, or using HLS34 Handheld
Configuration Tool. The HLS34 handheld tool allows quick configuration of large number of controllers.
To configure the controller locally, first remove the top cover. A CONFIGURATION MODE JUMPER is
located below the LCD display. When the jumper is set the controller is in normal operation. By
removing the jumper the controller enters to the configuration mode.
Once the configuration has been completed, by setting the jumper the controller returns to the normal
operation.
NOTE: The controller is supplied with the configuration jumper unset i.e. in the configuration mode
Configuration
Parameters