p.5
ROUTINE CLEANING
To protect the acrylic finish from Produits Neptune, it must be cleaned with a mild dish soap such as Dawn
or Sunlight or a specifically designed acrylic detergent.
NEVER USE ABRASIVE POWDER (VIM, AJAX, COMET, etc.), PETROLEUM DISTILLATE OR OTHER STRONG
SOLVENTS TO CLEAN THE BATH.
STAIN REPAIR
If you have a particularly resistant stain, you can use isopropyl alcohol to try and remove it (isopropyl
alcohol is toxic, so always follow the safety instructions that come with it and wear rubber gloves).
MINOR SCRATCH REPAIR
Small superficial scratches can usually be removed by using an automotive polishing compound such as
NuFinish or Meguiar’s mirror glaze.
MAJOR DAMAGE REPAIR
Major damage, including chips and cracks in your bathtub, can often be repaired by a qualified techni-
cian. Your Produits Neptune dealer can put you in contact with such a qualified professional.
TROUBLESHOOTING
PROBLEM
SOLUTION
Water remains around the bathtub rim or drain..
Check that the installation is level and that the bathtub is sitting firmly on its feet. (Drain slope is built into the bathtub.) Shim with adjust-
ment wedges if necessary
Bathtub bottom moves during use.
The bathtub is not sitting firmly on its feet. Shim with adjustment wedges.
Protective plastic film will not come off.
Use isopropyl alcohol.