Prodys S.L. Tel: +34 91 6896880
Θ
Fax: +34 91 6943777
Θ
Email:
sales@prodys.net
Θ
Web:
www.prodys.com
Page 34
the red-blinking <Connection> bar must be pressed to accept the call and
connect to it.
<Calling Number>:
It is possible to define up to three numbers for each
line which performs as an in-dialling filter. This is, the line will only
connect to calls with these caller IDs.
<Local Number>:
It is also possible to assign a single number to each line
in such a way that the line will only respond to calls made to this local
number. This can be used if you need to map an ISDN directory number
to a specific audio port.
<Allow incoming G711 calls>:
the ISDN indicates calls on G711 as voice
mode. The Prodys IP Family codec recognises this type of incoming call
and
proceeds automatically to reconfigure the Encoder and Decoder to
this mode
. As such, the user need not configure anything to allow the
automatic reception of incoming calls using G711.
IV.1.6
X21 Port:
From this option the speed of the X21 port is selected.
Summary of Contents for IP Family
Page 1: ...Nov 08 Rev 6 0...
