6
3
TREBLE
The TREBLE control is used to adjust the high frequency band.
The treble range is -10 dB to +10 dB.
Turning the knob to the right boosts the corresponding frequency band, while turning to the left
attenuates the band.
4
BASS
The BASS control is used to adjust the low frequency band.
The bass range is -10 dB to +10 dB.
Turning
the knob to the right boosts the corresponding frequency band, while turning to the left attenuates the
band.
5
INPUT 1
L
evel control of the signal connected to the input 1, which can be either a microphone or a line level
devise (see further).
6
INPUT 2
L
evel control of signal connected to the input 2, which can be either a microphone or a line level devise
(see further).
7
AUX
L
evel control of signal connected to the AUX input.
8
INPUT 1
Balanced or unbalanced input on 3.5mm pitch Euroblock connector.
This input can be used to connect low impedance dynamic microphones (30-600 ohm), condenser
microphones with phantom power supply and audio sources with line level signal output (e.g. radio
tuners, television receivers, media players, etc.).
a)
Connection of a Balanced line to the INPUT:
b)
Connection of a Unbalanced line to the INPUT:
