37
OSSERVARE TUTTE QUESTE AVVERTENZE:
•
NON COLLEGARE DIFFUSORI MISTI AD IMPEDENZA COSTANTE (4
Ω
o 8
Ω)
E TENSIONE COSTANTE
(70V o 100V
)
.
•
COLLEGANDO UN ALTOPARLANTE AD IMPEDENZA COSTANTE (4
Ω
o 8
Ω)
SI CONSIGLIA DI
RIDURRE IL MASSIMO POSSIBILE LA LUNGHEZZA DEI CAVI E DI AUMENTARE LA SEZIONE DEI
CAVI IN BASE ALLA DISTANZA COPERTA.
•
LA POTENZA TOTALE DEI DIFFUSORI A IMPEDENZA COSTANTE (4
Ω
o 8
Ω)
DEVE ESSERE ALMENO
240W CONTINUI.
•
QUANDO SONO COLLEGATI ALTOPARLANTI A IMPEDENZA COSTANTE (4
Ω
o 8
Ω) È VIETATO
COLLEGARE ALTOPARLANTI A TENSIONE COSTANTE (70V o 100V
)
SU QUALSIASI USCITA
GENERALE E DI ZONA.
•
LA POTENZA TOTALE DEGLI ALTOPARLANTI A TENSIONE COSTANTE (70V o 100V
)
COLLEGATI NON
DEVE SUPERARE I 240W CONSIDERANDO LE USCITE SIA GENERALI CHE DI ZONA.
•
TUTTI GLI ALTOPARLANTI COLLEGATI ALLE USCITE A TENSIONE COSTANTE (70V o 100V
)
DEVONO ESSERE DOTATI DI UN TRASFORMATORE CON TENSIONE DI INGRESSO PARI A QUELLA
FORNITA DALL'AMPLIFICATORE.
•
PER EVITARE IL RISCHIO DI SCOSSA ELETTRICA, NON TOCCARE MAI LE USCITE
DELL'AMPLIFICATORE DURANTE IL FUNZIONAMENTO.
Esempi di collegamento di linea ad impedenza costante:
Esempi di collegamento della linea a tensione costante:
23
USCITA ALTOPARLANTI A ZONE
Si tratta di un connettore Euroblock passo 5,08 mm. Questo connettore può accettare cavi da 0,5÷2,5
mm2 / 20÷14 AWG, per l'installazione fissa è necessario un cablaggio di Classe 2.
Collegate a queste uscite di zona separate solo altoparlanti a tensione costante a 100V.
Summary of Contents for ATMP240ZXL
